There is no way for me to know if Item # LC342328 is compatible. In order to get the correct hydraulic cylinder for your 2005 Gulf Stream Sun Voyager you would need to measure from the center of one port to the center of the other port on your current cylinder. view full answer...
You are on the money with the parts you need for your 2004 Gulf Stream Sun Voyager 8368 MXG on a Workhorse W22 chassis. I verified with Roadmaster for you that each of these parts are a fit for your RV:
- Roadmaster Rear Anti-Sway Bar # RM-1259-109
- Roadmaster TruTrac Front-Axle Trac Rod # RM-TRACW-22
The combination of these parts will dramatically increase the handling and comfort of your motorhome, allowing you to enjoy your time on the road instead of working to keep your rig centered... view full answer...
To measure your octagon foot pads, you just need to measure your foot pad from one flat side, straight across to the other flat side. The SnapPad BF 10 Jack Pads # SN26FR you were looking at would work if you get a measurement of 10".
There is also the SnapPad XTRA XL Jack Pads # SP74FR4 for measurements of 11.5" or 12".
I have included a picture that shows the points to be measured from. You just want to be sure you are measuring the actual foot and not a pad that is installed onto the foot. view full answer...
While I couldn't reference that model number, we do have an option for motorhome steps that have an 18 inch entry height, but you'll need the mounting bracket width as well. The only option for steps of that height are the Kwikee Electric RV Step Complete Assembly - Single - 39 Series # LC3724742.
The # LC3724742 are 23-7/8" wide x 10-1/4" deep and require a mounting space that is at least 25" wide and 12-1/4" deep. view full answer...
Go To Results